800 kW / 1.72 MWh Solar-Storage Hybrid System in Africa
Stockage d’énergie pour sites commerciaux et industriels (C&I)Catégorie
Présentation du projet
Integrated Control for Solar, Storage and Grid Operation
This project in Africa combines eight 215 kWh battery cabinets with rooftop solar generation and an integrated energy management solution. The system provides a total battery capacity of 1,720 kWh and a rated power of 800 kW, supporting both grid-connected and off-grid operation.
A centralized integration cabinet brings together the PCS, maximum power point tracking (MPPT) controllers, static transfer switch (STS) and other key components. The energy management system (EMS) coordinates rooftop solar generation, battery charging and discharging, and transitions between operating modes.
This architecture combines cabinet-based battery storage with centralized power conversion and control. It simplifies system-level coordination and provides flexible energy management for a site operating across different grid conditions.
Configuration du système
Configuration | Détails |
| Project Location | Africa |
| Battery Configuration | 8 × 215 kWh battery cabinets |
| Total Battery Capacity | 1,720 kWh / 1.72 MWh |
| Rated System Power | 800 kW |
Type de système | Solar-storage hybrid system |
| Solar Integration | Rooftop solar PV |
| Integrated Equipment | PCS, MPPT controllers, STS and associated components |
Energy Management | Centralized EMS coordination |
Operating Modes | Grid-connected and off-grid |
Synthèse des fonctions du système
- Coordinates rooftop solar generation with battery storage.
- Manages battery charging and discharging through the EMS.
- Supports grid-connected and off-grid operation.
- Integrates the STS for switching between operating modes.
- Combines centralized power management with eight battery cabinets.
Photos du projet
Planning a Solar-Storage Hybrid Project?
Tell us about your solar installation, site loads and grid conditions. Contact us to discuss battery storage, power conversion and control requirements for your project.